This is my absolute favourite and the only method I like to use for appliqué "freezer paper and liquid starch". I promised in a previous post that I would show how I do my appliqué.
1. Trace all appliqué shapes onto dull side of freezer paper (reverse shapes as needed).
2. Cut out each shape on traced line.
3. Iron on "wrong" side of fabric (pictured above).
4. Ruff cut a generous 1/4" around each shape. You're not looking for that prefect 1/4" here.
Here are all the supplies I need for preparing my shapes.
a. Liquid Starch
b. Clover Mini Iron
c. Seam Ripper
d. Small Saucer
e. Artist Brush (available at dollar stores)
5. Spray a small amount of starch in the saucer and add a couple of drops of water.
6. Take the artist brush and dip in starch mixture.
7. On the
right side of fabric shape, using the artist brush
wet the seam allowance with the starch mixture (without soaking the fabric)
8. I use the seam ripper in my left hand and the Clover Mini Iron in my right hand.
9. Using the seam ripper to hold the seam allowance while ironing with mini iron. The iron will dry and press the seam allowance to freezer paper side.
10. Continue around shape until seam allowance is all flipped in and starch has dried from ironing.
The seam allowance will stay flipped over because of the starch. Hold the iron for a few seconds to let the iron dry the fabric. I use the iron on the hottest setting but be very careful it gets VERY HOT. The best part is that if you don't like how your shaped turn out ie points showing up around the circle, you can re-wet and start again. Be careful with this as the freezer paper doesn't stand up with wetting too much. That's the reason I tell you to wet the right side, it keeps the water away from the freezer paper as much as possible.
Here is what it looks like when the seam allowance is all dry. The smaller circle is where I've taken out the freezer paper. You can see how it holds very well. Now you are ready to place on your background fabric and start attaching the applique shapes.
See the star has some funny ends showing. I'll trim these just a little and then when I hand appliqué I will use the needle to push under the remainder of the ends sticking out. I've used this method for all kinds of shapes and sizes, even tiny circles.
Here is my layout ready for pinning or I like to use Roxanne's glue to hold in place. I only use a few tiny drops around the seam allowance and no pins to get in my way. This block is part of a kit I bought at
The Quilted Crow....oh I guess a couple years ago now. The best appliqué thread I've found is called
Invisafil and it's truly invisible when you sew with it. People don't believe me until they give it a try and then are totally amazed at how you can't see the stitches. The other nice thing is that you
don't need every colour, I've been using one colour for all the shapes and it doesn't show.
A small update on my 9-patches....15 of them completed...
Happy Stitching.
I decided to take the plunge (a really big step for me...teehee) and machine appliqué my block (not enough time to do everything by hand). I used the Invisafil thread in the top and in the bobbin. Most of the appliqué pieces blended fine with using the black thread but the star being so light needed the beige thread. I'm very happy with how this turned out...whew. I think I might do the machine appliqué more often. Hmmm...opens lots of possibilities, need to do more thinking on that.
Here is a close up of the machine appliqué. Don't know if you can see it but, I did a very small zig zag around all my shapes.
